Respirator Certifications & Test Reports
BEESAFETY respirator kits combine certified mask bodies and compatible filter components. This page identifies the component models, applicable standards, certificate references and test-report references used in our current RD-510, RD-518 and RF-610 kits.
Retail kit and certified component mapping
- RF-610 Full Face Respirator Kit: MJ-4006 full face mask with 4081 A1 gas filter cartridges and 408CM P2 reusable particle filters.
- RD-510 Half Face Respirator Kit: 410 half mask with 4081 A1 gas filter cartridges and 408CM P2 reusable particle filters.
- RD-518 Respirator & Goggles Kit: 410 half mask with 4081 A1 gas filter cartridges and 408CM P2 reusable particle filters, supplied with safety goggles as a kit component.
Verified certificate and test-report references
| Component model | Product type | Standard | EU type-examination certificate | Test report | Certificate expiry |
|---|---|---|---|---|---|
| MJ-4006 | Full face mask, Class 2 | EN 136:1998 | CE-PC-250408-192-01-9A | 2025 (D)-043 | 21 August 2030 |
| 410 | Half mask | EN 140:1998 | CE-PC-230918-244-01-9A | 2023 (D)-148 | 1 July 2029 |
| 4081 | A1 gas filter | EN 14387:2021 | CE-PC-230918-244-02-9A | 2023 (D)-146 | 1 July 2029 |
| 408CM | P2 reusable particle filter | EN 143:2021 | CE-PC-230918-244-03-9A | 2023 (D)-147 | 1 July 2029 |
The certificates above were issued under Regulation (EU) 2016/425 by CCQS Certification Services Limited, Notified Body 2834. Certificate validity remains subject to the conditions stated in the complete certificate and applicable conformity-assessment requirements.
Why the retail kit name differs from the certificate model
RD-510, RD-518 and RF-610 are BEESAFETY retail kit names. PPE certification is issued for the individual facepiece and filter component models used in those kits. For example, the RF-610 kit uses the certified MJ-4006 full face mask, while the RD-510 and RD-518 kits use the certified 410 half mask. The table above provides the corresponding component mapping.
Request complete compliance documents
For a complete certificate, declaration of conformity, test report or product instruction, email support@beesafetypro.com. Include the BEESAFETY retail model, component model if known, destination market and the document needed so the request can be matched accurately.
Shop compatible products
- RF-610 Full Face Respirator Kit
- RD-510 Half Face Respirator Kit
- RD-518 Respirator & Goggles Kit
- A1/P2 Replacement Filter Kit
Important selection and use information
Certificate and report references apply to the named component models. Test results apply to the samples identified in the complete reports. Always use the complete certificate, declaration, instructions and test report when making a compliance decision.
Select respiratory protection from a documented hazard assessment, the substance safety data sheet, contaminant type and concentration, required protection factor, exposure duration and local regulations. Air-purifying respirators do not supply oxygen and must not be used in oxygen-deficient, immediately dangerous to life or health, or unknown atmospheres.
Before use, read the instructions, confirm compatibility, inspect every component and complete the required fit check. See our respirator selection guide and A1/P2 compatibility guide. For complete compliance documents or product-specific questions, contact BEESAFETY support.